E-mail: service@1001718.com
E-mail: service@1001718.com
溜槽檢測器Plugged Chute Detector
溜槽檢測器Plugged Chute Detector概述drexelbrook的齊平安裝的傳感器能可靠地檢測物質的存在或不存在流經溜槽。如果工藝材料停止流動,由於堵塞的條件,該係統將報警,允許進一步的行動發生(報警操作員,關閉一個傳送帶等)。這允許操作員在它發生之前,以防止出現問題。自動識別和忽略塗層,以防止誤報曲線和平麵傳感器可用通用電源自動檢測並調整為輸入電源雙刀雙擲繼電器幹接
溜槽檢測器Plugged Chute Detector的詳細資料
溜槽檢測器Plugged Chute Detector
Overview
Drexelbrook’s Flush-Mounted Sensors reliably detect presence or absence of material flowing through chutes. If process material stops flowing due to a plugged condition， the system will alarm， allowing further action to occur (alerting an operator， shutting down a conveyor belt， etc.). This permits the operator to prevent a problem before it happens.溜槽檢測器Plugged Chute Detector
Automatically recognizes and ignores coatings to prevent false alarms
Curved and flat sensors are available
Universal power supply automatically detects & adjusts to input power source
DPDT relay dry contacts at 5A， 120VAC
Less maintenance than other technologies; no moving parts to hang up or wear out
Technology：
RF Admittance.
Calibration：
None (for most applications).
Modes Of Operation：
High and Low Level.
Repeatability：
2mm (0.08 inch) conductive liquids.
Response Time：
Less than one second.
Ambient Electronic Temperature：
-40 to 70°C (-40 to 158°F) FM， FMc
Storage Temperature：
-40 to 85°C (-40 to 185°F).
Indicators：
LEDs： Green Power， Red Relay 1.
Time Delay：
0-60 seconds， forward or reverse-acting.
Supply Voltage：
19-250 VAC
18-200 VDC
Auto-detecting without jumpers.
Power Consumption：
2 watts maximum.
Relay Contacts：
DPDT dry contacts at 5A， 120Vac.
Maximum Contact Load：
5A/30 VDC
5A/250 VAC
Maximum Switching Capacity：
2000 VA/150 Watt.
Minimum Contact Load (DC)：
100mA/12 VDC
0 -200mA / 12 VDC (Optional)
Housing：
Powder-Coated aluminum with two cable entries.
Cable Entry：
M20 x1.5
¾-inch NPT
Ingress Protection：
IP66 NEMA 4X
該產品由深圳市丝瓜视频看污APP電子科技有限公司提供，銷售商地址位於深圳市南山區前海路振業國際商務中心1206。請您仔細閱讀產品使用說明書，正確使用。
如果想試用該產品，請以下單位：
丝瓜视频看污APP電子主要銷售通信設備、儀器儀表、電力設備、熱工儀表、校準設備及工具配件。
|
||||
|
||||
 |
3183402039